-
See-through compressor: Project InnoVET XR
Thanks to this project, a Mixed Reality application was created to allow students to get started with the screw compressor. Initially, students can look at the most important parts via an individual learning path. Secondly, students can carry out …
Translated by
Article -
Dual learning: Electricity sector
In this article you will find information about dual learning for secondary education, dual learning for adult education and the system of 'Learning and Working' for the directions that lead to a profession in the electricity sector.
Translated by
Article -
Cool learning: Project InnoVET
The aim of the project was to facilitate the dual entry of refrigeration technology students (5 BSO) into the workplace. For this they use a number of short videos that focus on a subject and explore it in more depth:
- cooling techniques: what exactly …
Translated by
Article -
Electricity: safety, cabling, alternating and direct voltage
Step-by-step explanation of electricity with attention to safety, cabling, direct and alternating voltage.
- Electricity is an important part of a refrigeration technician's job and does not come without its share of dangers. That is why it is …
Translated by
Video -
Refrigeration, a job with a future
This video is part of a project of the Spectrum School and Frixis. The project came about with the support of the Flemish education program InnoVET, which supports the development of innovative learning methods and teaching materials in …
Translated by
VideoOrganisation, company, NPO -
Correct installation of a cooling installation
Step-by-step explanation of installing a cooling installation with attention to components, mounting material, safety and maintenance.
For the correct installation of a cooling installation, we first choose the correct installation location. Choosing …
Translated by
Video -
Different setups of a cooling installation
Step-by-step explanation of the set-up of a cooling installation with attention to the main components, the hazards and the risks.
There are four main components to a refrigeration plant: the compressor, the condenser, the expander, the evaporator. …
Translated by
Video -
Dismantling a cooling installation
Step-by-step explanation of dismantling a cooling installation with attention to safety, the environment and the sorting of materials.
If you are asked to disassemble an installation, it is important to carry out the correct step-by-step plan and to …
Translated by
Video -
The maintenance schedule of a cooling installation
Step-by-step explanation of the maintenance of a cooling installation with attention to the logbook, maintenance instructions and checks.
- The log should always be available near the installation. This can be in electronic form or on paper. This is …
Translated by
Video -
Brazing
Step-by-step explanation of brazing with attention to preparation, tool setting and safety.
- Before we start brazing, we start with the preparation. We prepare by deburring the tube on the inside. Deburring is the removal of irregularities and sharp …
Translated by
Video -
COSMO: Virtual reality and augmented reality
COSMO is a research project involving companies from the manufacturing industry, research groups and secondary schools.
Translated by
ArticleTeacher -
Circular economy and ecodesign: Brochure
In this brochure you will find the information and content of everything that Flanders Circular has done in recent years regarding Circular Economy and Ecodesign. It contains methods for tackling your curriculum, and workshops/welding/paths that …
Translated by
Article