-
TIG welding: Basic
This video explains the basics of TIG welding. The teacher talks about the application area, the current types and the requirements.
Translated by
VideoTeacher -
Visual welding examination: Learning module
This learning path is about a visual weld inspection. The student can independently go through this learning tool and then work in practice to carry out visual weld inspection for fillet welds.
This learning module covers the following topics:
…Translated by
Interactive exercise -
Spokes of a wheel: Tutorial
This tutorial shows how you should proceed to the spokes of a wheel.
Translated by
VideoTeacher -
The Joule-effect: Experiment
In this video, on the basis of an experiment, the Joule effect demonstrated. Here you can determine that a cable subjected to electric current can cause a fire hazard.
Translated by
VideoTeacher -
Replica cover: Making a molding from polyester
Making a mold in glass fiber reinforced polyester, from which a polyester cover is then made.
Translated by
Video -
3D design: Create rubber mold and reproductions with casting resin
Make a rubber mold starting from a 3D model. Then pour a plastic casting resin into this mold to obtain a reproduction.
Translated by
Video -
Drilling with the JBVOD method
For example, should you drill a hole of Ø 20 mm, then you first need to drill.
Proceed as follows:
- drilling Ø 6
- take a piece of cotton soaked rag in oil or coolant and place it in the pre-drilled hole = the JBVOD method
- Then drill Ø 20. The …
Translated by
VideoPrevention advisor